Solar road stud light

Model CF-S-100

Field of application  

Solar Road Stud model CF-S-100 is suitable for low and medium speed road warning lane

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.

Technical specifications

  • Dimensions: 110 x 97 x 22,8 mm.
  • Solar Panel: 2V / 100 MA (Monocrystalline silicon).
  • Battery: 2V/600MAH High Temperate NI-MH Battery.
  • LED Quantity: 6 pcs.
  • LED Frequency: Flashed for 90 times per Minute or as customed
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 100h after fully charged.
  • Material: Anti – UV PC + Aluminum.
  • Visual distance: >1000 meters.
  • Proted level: IP68, can work under water
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons.

Installation steps

  • Check if the solar panel charges and discharges normally.
  • Identify the place for installation.
  • Clean road surfaces.
  • Clean the underside of the solar headlamp and use epoxy glue to stick it to the ground.
  • Wait 8 hours for it to dry before activating the solar pickup.

Warranty

1 year.

Model CF-S-101

Field of application 

Solar Road Stud model CF-S-101 is suitable for low and medium speed road warning lane.

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.

Technicals specifications

  • Dimensions: 120mm, Height 25 mm.
  • Solar Panel: 2V/100MA (Monocrystalline silicon).
  • Battery: 2V/600MAH High Temperate NI-MH Battery.
  • LED Quantity: 6 pcs.
  • LED Frequency: Flashed for 90 times per Minute or as customed.
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 100h after fully charged.
  • Material: Anti – UV PC + Aluminum.
  • Visual distance: >1000 meters.
  • Proted level: IP68, can work under water
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons.

Installation steps

  • Check if the solar panel charges and discharges normally.
  • Identify the place for installation.
  • Clean road surfaces.
  • Clean the underside of the solar headlamp and use epoxy glue to stick it to the ground.
  • Wait 8 hours for it to dry before activating the solar pickup.

Warranty

1 year.

Model CF-S-102

Field of application 

Solar Road Stud model CF-S-102 is suitable for low and medium speed road warning lane.

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night

Technical specifications

  • Dimensions: 120mm, Height 25 mm.
  • Solar Panel: 2V/200MA (Monocrystalline silicon).
  • Battery: 2V/1200MAH High Temperate NI-MH Battery.
  • LED Quantity: 8 pcs.
  • LED Frequency: Flashed for 90 times per Minute or as customed.
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 120h after fully charged.
  • Material: Anti – UV PC + Aluminum.
  • Visual distance: >1000 meters.
  • Proted level: IP68, can work under water
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons.

Installation steps

  • Check if the solar panel charges and discharges normally.
  • Identify the place for installation.
  • Clean road surfaces.
  • Clean the underside of the solar headlamp and use epoxy glue to stick it to the ground.
  • Wait 8 hours for it to dry before activating the solar pickup.

Warranty

1 year.

Model CF-S-103 D Y CF-S-103 S

Field of application

Solar Road Stud model CF-S-103 D / CF-S-103 S is suitable for low and medium speed road warning lane.

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.

Technical specifications

  • Dimensions: 105 x 105 x 23 mm.  MODEL CF-S-103 D
  • Solar Panel : 2V/100MA(Monocrystalline silicon).
  • Battery: Ni-mh:2V/600MAH NI-MH Battery.
  • LED Quantity: 4 pcs (CF-S-103D); 2 pcs (CF-S-103S).
  • LED Frequency: Flashed for 90 times per Minute or as customed.
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 120h after fully charged.
  • Material: Anti – UV PC + Aluminum
  • Visual distance: >1000 metros. MODEL CF-S-103 S
  • Proted level: IP68, can work under water
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons

(MODEL CF-S-103 D)  /  (MODEL CF-S-103 S)

Installation steps

  • Check if the solar panel charges and discharges normally.
  • Identify the place for installation.
  • Clean road surfaces.
  • Clean the underside of the solar headlamp and use epoxy glue to stick it to the ground.
  • Wait 8 hours for it to dry before activating the solar pickup.

Warranty

1 year.

   MODEL CF-S-103 D

   MODEL CF-S-103 S

Model CF-S-104 D Y CF-S-104 S

Field of application 

Solar Road Stud model CF-S-104 D / CF-S-104 S is suitable for low and medium speed road warning lane.

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night

Technical specifications 

  • Dimensions: 105 x 105 x 23 mm.
  • Solar Panel: 2V / 100 MA (Monocrystalline silicon).
  • Battery: 2V/600MAH High Temperate NI-MH Battery.
  • LED Quantity: 6 pcs (CF-S-104D); 3 pcs (CF-S-104S)
  • LED Frequency: Flashed for 90 times per Minute or as customed
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 120h after fully charged.
  • Material: Anti – UV PC + Aluminum.
  • Visual distance: >1000 meters.
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons.                                                                                                                            

(MODEL CF-S-104 D)  /  (MODEL CF-S-104 S)

Installation steps

  • Check if the solar panel charges and discharges normally.
  • Identify the place for installation.
  • Clean road surfaces.
  • Clean the underside of the solar headlamp and use epoxy glue to stick it to the ground.
  • Wait 8 hours for it to dry before activating the solar pickup.

Warranty

1 year.

   MODEL CF-S-104 D 

MODEL CF-S-104 S

Model CF-S-105 F

Field of application  

Solar Road Stud model CF-S-105 F is suitable for low and medium speed road warning lane.

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night

Technical specifications

  • Dimensions solar road stud: 129 x 117 x 77 mm.
  • Dimensions stem: 54 mm
  • Solar Panel: 2V / 100 MA (Monocrystalline silicon).
  • Battery: 2V/600MAH High Temperate NI-MH Battery.
  • LED Quantity: 6 pcs.
  • LED Frequency: Flashed for 90 times per Minute or as customed
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 120h after fully charged.
  • Material: Anti – UV PC + Aluminum.
  • Visual distance: >1000 meters.
  • Proted level: IP68, can work under water
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons.

Installation CF-S-105 F     

  • Check if the solar panel charges and discharges normally.                                          
  • Identify the place for installation.
  • Clean road surfaces.
  • Dig the hole.
  • Put the solar road studs in the installation position and set the srew position.
  • Move the solar road studs and dig the hole drill for the screw, knock the screw into the hole with hammer. Put the solar road studs on the screw and fix the nuts for the screws.
  • Put the cement (Put some cement on the nuts to fix the screws.

Warranty

1 year

Model CF-S- 106 / CF-S- 106 F

Field of application 

Solar Road Stud model CF-S-106 / CF-S-106 F is suitable for low and medium speed road warning lane.

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.

Technical specifications                                                                

  • Dimensions CF-S-106: 115 x 110 x 23 mm.
  • Dimensions CF-S-106 F: 115 x 110 x 23 mm
  • Dimensions stem model CF-S-106 F: 55 mm.
  • Solar Panel: 2V / 100 MA (Monocrystalline silicon).
  • Battery: 2V/600MAH High Temperate NI-MH Battery.
  • LED Quantity: 4 pcs.
  • LED Frequency: Flashed for 90 times per Minute or as customed
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 120h after fully charged.
  • Material: Anti – UV PC + Aluminum.
  • Visual distance: >1000 meters.
  • Proted level: IP68, can work under water
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons.

   (MODEL CF-106) 

   (MODEL CF-106 F) 

Installation steps CF-S-106

  • Check if the solar panel charges and discharges normally.
  • Identify the place for installation.
  • Clean road surfaces.
  • Clean the underside of the solar headlamp and use epoxy glue to stick it to the ground.
  • Wait 8 hours for it to dry before activating the solar pickup

Procedimiento de instalación CF-S-106 F

  • Check if the solar panel charges and discharges normally                               
  • Identify the place for installation
  • Clean road surfaces.
  • Dig the hole.
  • Put the solar road studs in the installation position and set the srew position
  • Put the cement (Put some cement on the nuts to fix the screws)

Warranty

1 year

 MODEL CF-S-106 F

  MODEL CF-S-106

Model CF-S-107 / CF-S-107F

Field of application  

Solar Road Stud model CF-S-107 / CF-S-107 F is suitable for low and medium speed road warning lane.

Depending on the actual road conditions, you can select a continuous producto, single or multiple products, combined to install them on the road pavement either on one or both sides.

At nigt, its signaling funtion provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.

Technical specifications

  • Dimensions CF-S-107: 115 x 110 x 23 mm.
  • Dimensions CF-S-107 F: 115 x 110 x 23 mm.
  • Dimensions stem model CF-S-107 F: 55 mm.
  • Solar Panel: 2V/100MA (Monocrystalline silicon).
  • Battery Ni-mh:2V/ 600MAH NI-MH Batería.
  • LED Quantity: 6 pcs.
  • LED Frequency: Flashed for 90 times per Minute or as customed
  • LED Color: Red, yellow, white, blue, green.
  • Luminous intensity: 12000mcd-20000mcd.
  • Lighting Time: 120h after fully charged.
  • Material: Anti – UV PC + Aluminum.
  • Visual distance: >1000 meters
  • Proted level: IP68, can work under water
  • Working Temperature: -20°C +80 °
  • Weight resistance in static: >20 Tons.

  

 (MODEL CF-107)

(MODEL CF-S-107  F)

Installation steps CF-S-107

  • Check if the solar panel charges and discharges normally  
  • Identify the place for installation
  • Clean road surfaces
  • Clean the underside of the solar headlamp and use epoxy glue to stick it to the ground
  • Wait 8 hours for it to dry before activating the solar pickup

 

Installation steps CF-S-107 F

  • Check if the solar panel charges and discharges normally.
  • Identify the place for installation.
  • Clean road surfaces
  • Dig the hole.
  • Put the solar road studs in the installation position and set the srew position
  • Put the cement

Warranty

1 year

 MODEL CF-S-107 F

 MODEL CF-S-107