Ultraphotoluminescent resin

Ultraphotoluminescent joint adhesive

Field of application

Ultraphotoluminescent resin is a liquid ceramic that when applied on joints, whether horizontal or vertical, can creat different aesthetic effects, it is designed to create fantastic decoration and signage designs in gardens, parks, walks, rural houses, resort, spa, hotels, saunas , swimming pools, building facades, adapting to the environment in which it is used and forming part of its surroundings, being optimal to give beauty to any type of area we want to have standing out in complete darkness.

Properties

  • For joints or grooves from 0 to 20mm
  • Easy to prepare by whisking
  • It does not produce unpleasant odors
  • Ease of extension
  • Fill the gasket perfectly
  • High chemical-mechanical resistance
  • Fully waterproof
  • It is activated with sunlight or artificial light
  • It allows visibility in dark conditions or in poorly lit areas
  • It is water resistant
  • Once the adhesive is activated, the luminescence lasts from 10 to 12 hours

Presentation

Ultraphotoluminescent resin is presented in 1.18 kg pot; with different compartments for the two components A and B.

How to use

  • Preparation: Pour component B into the canister of component A
  • Mixing: Mix the two components with a whisk at low speed until you get a uniform color.
  • Aplication:
  • If you want to fill all the joints: apply with a rubber trowel completely filling the joints. Remove excess product in surface.
  • It is also possible to perform localiced filling of grooves or grooves in prefabricated elements to obtain an aesthetic effect.

Storage conditions/ Storage time

Store in its original containers tightly closed and protected from extreme temperatures and humidity. Avoid freezing.

Stored correctly, Ultraphotoluminescent Resin can be stored for up to 6 months.

To be considered

  • No light has to strike directly on the surface treated, to appreciate the full effect of the luminescence
Properties
Main function: Grouting
Physical aspect: Yellowish-greenish liquid
Colors: Blue and Green
Optimum application temperature: 20º C.
Side effect: None described
Operating temperature range: -15ºC 50ºC.
Luminance after 10 minutes Greater than 700 mcd/m2
Luminance after 60 minutes Greater than 90 mcd/m2
Dimming Time UNE 23035 (*) Greater than 9400 minutes
(*) Logarithmic extrapolation according to UNE 23035 until the time in which the luminance is of 0.3 mcd / m2
The technical data reflected are based on the technical knowledge obtained in our laboratories and by our technicians.