Anti dust for land

Natural surface pavement

Field of application

It is a diluted binder additive for soil stabilization, for applications in areas with low carrying capacity, where a stabilization of loose particles and an elevation of the CBR is demanded. Its excellent binding and waterproofing power improves, in all aspects, any pedestrian path, bike lanes, or roads with low traffic intensity. Very suitable for use in civil works for stabilization of embankments, and can also be used as dust.


  • Excellent binding power
  • Improves the impermeability and durability of the road
  • It can be used by mixing it with cements and limes
  • Low alkali content
  • Increase the resistance of the ground

Mode of use and amounts

It is added to water, according to the following solution:

First we will wet the ground; Then we will dissolve 0.2 liters of additive in 1.6 liters of water (1: 8 solution) and with the mixture obtained, 1 m2 of soil will be treated.

Tool cleaning

Dirty equipment and tools can simply be cleaned with water.

Storage conditions / Storage time

Store in its original containers tightly closed and protected from extreme temperatures and humidity. Avoid freezing.

Stored correctly, it can be stored for up to 8 months.

Handling and transport

For handling, the usual preventive measures for handling chemicals should be observed, for example: wear glasses and gloves. Wash your hands before a break and at the end of work. Do not eat, drink and smoke during application.

The disposal of the product and its packaging must be carried out in accordance with current legislation and is the responsibility of the final holder.


It comes in bottles of 20 liters / 1 000L tank

To be considered

  • Do not use dosages lower or higher than recommended without prior consultation with our Technical Department
  • Check compatibility vetween additives before use


Main Function: Binder
Physical appearance: White liquid
Minimum temperature for layer formation 5 º C.
Optimum working temperature 20º C.
pH +/- 6
The technical data reflected are the result of statistical results and do not represent guaranteed minimums.